How to Make Metal Guitars Sound Big? (4 Tips To Get You Started)


Are you a metal guitarist looking for ways to make your guitar sound bigger and more powerful? Do you want to create a full, rich sound that’s sure to impress? If so, then you’ve come to the right place.

In this article, we’ll provide you with 4 essential tips that will help you make your metal guitar sound huge.

From adjusting the tone of the guitar to adding distortion and using reverb and delay, we’ll show you how to get the most out of each step.

Plus, we’ll discuss the different types of metal genres and the common mistakes people make when trying to make their guitars sound big.

So, if you’re ready to take your metal guitar sound to the next level, read on!

Short Answer

One way to make metal guitars sound big is to use a combination of distortion and EQ to emphasize the tonal characteristics of the guitar.

Start by cranking up the distortion and then use the EQ to boost the mids and lows, while cutting the highs.

This will create a bigger and more powerful sound.

Additionally, using multiple guitar tracks with slightly different settings can help to create a fuller, richer sound.

Finally, adding reverb and delay can help to make the guitar sound even bigger.

Adjusting the Tone of the Guitar

When it comes to making metal guitars sound big, one of the most important things to consider is adjusting the tone of the guitar.

This can be done by tweaking the pickup settings, adjusting the tone knobs, and even changing the strings.

When it comes to pickups, it is important to find the right balance between the neck and bridge pickups.

This will help to create the desired crunchy sound that is essential for metal music.

Additionally, adjusting the tone knobs can help to bring out the desired frequencies.

These adjustments should be done carefully, as too much of either can cause the tone to become too thin or too muddy.

Finally, it is important to use the right strings.

Heavy gauge strings are essential for metal music as they provide the crunchy sound that is desired.

Additionally, they help to keep the guitar in tune, which is important for a big sound.

Overall, adjusting the tone of the guitar is essential for making metal guitars sound big.

With the right pickups, tone knobs, and strings, metal guitarists can achieve the desired sound and take their music to the next level.

Adding Distortion

When it comes to making metal guitars sound big, adding distortion is essential.

Distortion is a type of effect that is used to create a crunchy, distorted sound.

This effect is especially popular in metal music, as it is used to create the heavy, aggressive sounds that are so iconic to the genre.

Distortion can be added to the guitar in several different ways.

One way is to use pedals, such as distortion or overdrive pedals, which can be used to manually adjust the level of distortion.

Additionally, distortion can be added with an amplifier, as many amps come with built-in distortion effects.

When adding distortion, it is important to adjust the levels of the low, mid, and high frequencies.

This will help to create a balanced sound that is both big and clear.

It is also important to adjust the gain, as this will determine the level of distortion.

Finally, it is good to experiment with different settings, as this will help to find the perfect level of distortion for the particular track.

By following these steps, metal guitarists can create a big, distorted sound that will take their music to the next level.

Using Reverb and Delay

Using reverb and delay is an essential part of making metal guitars sound big.

Reverb helps to create a larger soundscape, while delay can add depth and clarity.

When adding reverb and delay, there are a few key points to remember.

First, use the right amount of reverb and delay; too much can make the sound muddled and muddy.

Second, make sure the reverb and delay are balanced; if one is too loud, it can dominate the mix.

Finally, use different types of reverb and delay for different types of sounds; for example, plate reverb is great for creating a lush atmosphere, while a slapback delay can add a punchy, aggressive feel.

With these tips in mind, metal guitarists can use reverb and delay to create an expansive, powerful sound.

Adjusting the EQ

The EQ (equalizer) is one of the most important tools in the production process, and it can make a big difference in how your metal guitar sounds.

When adjusting the EQ of your metal guitar, you want to focus on the low, mid, and high frequencies.

Start by setting the low frequencies to give your guitar some warmth and depth, the mid frequencies to provide clarity and punch, and the high frequencies to give your guitar some sparkle and presence.

You may also want to experiment with boosting the mids a bit to give your guitar more of an aggressive edge.

When adjusting the EQ, it’s important to pay attention to the overall balance of the frequencies and to make sure that the sound is not too muddy.

Combining the Steps for Maximum Results

Once the four steps have been applied to your metal guitars, the next step is to combine them in order to achieve maximum results.

First, focus on getting the tone of the guitar right.

This means adjusting the levels of the low, mid, and high frequencies to achieve a tight, crunchy sound.

Once this is done, the distortion can be added to increase the overall volume and intensity.

Next, use reverb and delay to create a wider soundscape.

Reverb will add depth to the sound, while delay will create an echoing effect.

Experiment with different combinations of reverb and delay to achieve the desired sound.

Finally, use the EQ to bring out the desired frequencies.

Adjusting the EQ can help to bring out the specific elements of the sound that you want to emphasize.

By following these four steps carefully and combining them correctly, metal guitarists can create a big sound that will take their music to the next level.

With the right techniques and a bit of experimentation, you can create a sound that is unique and powerful.

So what are you waiting for? Start experimenting and create a big sound for your metal guitar tracks!

Different Types of Metal Genres

When it comes to making metal guitars sound big, it is important to understand the different types of metal genres.

Heavy metal, thrash metal, death metal, black metal, and doom metal are all part of the metal family.

Each genre has its own unique sonic characteristics and tone.

Heavy metal has a driving, hard-hitting sound, thrash metal is fast and aggressive, death metal is dark and heavy, black metal is raw and atmospheric, and doom metal is slow and methodical.

Each genre requires a slightly different approach when it comes to making the guitars sound big.

For example, heavy metal requires more distortion and a tighter tone while thrash metal needs a more aggressive attack and a slightly looser tone.

Death metal requires a deep and dark tone, while black metal needs a more raw and atmospheric sound.

Doom metal requires a slower, more methodical approach with a thick and heavy tone.

Understanding the nuances of each type of metal genre will help guitarists create the perfect sound for their music.

Common Mistakes When Making Metal Guitars Sound Big

When making metal guitars sound bigger, many people make the mistake of cranking up the distortion and gain, thinking that this will make the sound bigger.

Unfortunately, this usually only results in a muddy, distorted sound.

To get a big sound, the tone of the guitar should be adjusted first, to achieve a tight, crunchy sound.

After adjusting the tone of the guitar, distortion should be added, but the levels of the low, mid, and high frequencies should be carefully adjusted.

Reverb and delay should be used to create a wider soundscape, and the EQ should be adjusted to bring out the desired frequencies.

By following these steps and avoiding the mistake of cranking up the gain and distortion, metal guitarists can create a big sound that will take their music to the next level.

Final Thoughts

Creating a big sound for metal guitars doesn’t have to be a daunting task.

With the right techniques and adjustments, you can easily get the crunchy, tight tone you’re looking for.

By following the steps outlined above, you can adjust the tone, add distortion, use reverb and delay, and make the necessary EQ adjustments to get the big sound you’re after.

With a little practice and experimentation, you’ll have no problem getting the metal guitar sound you desire.

So, get out there and get creative!

Harry Roy

Harry is a passionate music enthusiast and an aspiring writer. From an early age, he has been passionate about music and loves listening to and writing about it. He takes great pleasure in exploring different musical genres and analyzing the stories and messages that the musicians are trying to convey.

Recent Posts